Sunday, February 15, 2009

Piano burning

Eric and his friends at the college wanted a proper celebration for the piano.  They decided to burn it rather than let it rot in the land fill.  On May 11, 2008, the burn took place at Jasper Farm, Iowa.

The end

Posted by Picasa

Nearly gone

Posted by Picasa

Almost gone

Posted by Picasa

Hotter and hotter

Posted by Picasa

The fire rages on

Posted by Picasa

Raging fire

Posted by Picasa

Piano burning

Posted by Picasa

Piano burning

Posted by Picasa


The piano was destined for the dump. Nobody wanted it. They tried to give it away. No takers. So Eric and friends took it to the farm. They built the tripod and collected fire wood. Lots of people came to watch. They filmed the whole thing. I took home lots of burned metal, which I hope to make into a bricolage projects someday.
Posted by Picasa

Wednesday, April 02, 2008

Caution using melted plastic

All plastic melting should be done in a well ventilated room. If you work in a smaller area, you should use a gas mask. Check at your hardware store for such a mask. I also find that you need good ventilation when using spray paint. Wear a paper mask if spraying a lot or use the gas mask for spraying a lot in close quarters.

Tuesday, April 01, 2008


Top part is a thick piece of styrene foam sprayed heavily with clear acrylic medium to cause melting and distortion. The styrene was painted with black and gold paint and over painted with a clear medium and green/blue interference pearlex powder. It is mounted to a piece of tin can that has been rusted and painted with gold and clear medium.

Susan Lenart Kazmer bead style. Cut small piece of metal and roll into bead shape treat with domed resin or paint and spray with lacquer. Insert paper treated with resin, or gel medium, insert yarn. Drill through the metal with dremel insert wire and wrap closed with a loop.


white plastic yogurt carton lid, ironed and painted with acrylic paint and sprayed with clear lacquer

1 tyvek envelope melted with heat gun and iron painted with radiant rain and clear acrylic spray and wrapped with wire

2. metal piece burned with torch, clear UTEE and some RR mist

3 clear plastic drinking cup ironed, then glued on a small piece of old sheet music sprayed with radiant rain using mod podge, and then sprayed on Ace instant dry clear lacquer.

4. melted plastic bag and clear UTEEwith RR mist

5. melted plastic bag attached to metal piece with utee …sprayed with RR mist and then lots of clear UTEE

6. tinfoil sponged with pigment ink, clear UTEE and radiant rain mixed

7. several layers of plastic rain coat folded and ironed, painted with RR mist and clear lacquer


Metal pieces with radiant rain mist, clear lacquer spray and clear UTEE

File the edges until they are not rough, then heat the metal with a small propane torch until it changes colors. You can easily do this without the torch, it just happens to be something I like to do. Then spray RR mist and over that spray clear lacquer.

Mixed Media art technique for April

Charms etc from recycled metal and plastic

My goal this year is to use as many recycled items in my art as possible. I have been experimenting with painting metal and plastic items. I do not have it all perfected, but I will share my experiments. Feel free to use these ideas and do some experimenting yourself. For the metal pieces I used International coffee tins cut to small pieces with tin snips.

For melted plastic bags, I found an old clear plastic rain coat worked well. I also use clear grocery bags and any clear plastic bags that come with new products. i.e. bags holding cords when I got my new computer. Dry cleaning bags work well too. You have to experiment to see which kind you like. I also like to melt clear plastic drink glasses and dessert plates.

I use a variety of spray paint that I get at ACE Hardware store. I use an instant dry clear lacquer, clear acrylic medium either gloss or matte. I also use their Fusion paint that sticks to plastic. It is opaque so you loose any sight of the original material. I use golden acrylic paint, heavy bodied and fluid. I also use golden mediums and mod podge to make paper sturdier and sometimes translucent.

Plastic bag: I use a firm table that I put an old sheet on, then lay the plastic bags several layers thick and cover with a piece of canvas and iron over it with a hot iron. You can experiment with putting acrylic paint on before ironing. I have used paint both before and after ironing. You can also use a piece of paper over or under the plastic when you iron. I have tried using old magazine pages and tried to get the plastic to adhere to the paper. Then you can wash off the paper and the print will transfer to the plastic. I have had this work a couple of times, but it is far from perfect.

For clear plastic drink cups or clear plastic desert plates I cut and place under the canvas cloth, then I melt with the iron. It turns opaque when you melt it. These melted plastic pieces are flexible enough not to break but sturdy enough to be a backing for UTEE application. Acrylic paint will stick if you layer it with a clear acrylic spray or lacquer. I use white plastic carton lids in a similar fashion.







Wednesday, October 10, 2007

My first entry for Inspire Me Thursday


The theme for Inspire me Thursday this week is Birds. Here is my page.
IMT website: http://www.inspiremethursday.com/category/create/

Tuesday, September 25, 2007

Renewal, reconstructed, and refound


I am going to try to revive this blog so I will have a place to post some items. This is a collage I made for a swap-bot swap.

Friday, February 03, 2006


Self Portrait, a handcarved stamp. This is a page from my 8 x 10 altered book journal.  Posted by Picasa

Live Life! Pages from the Reconstuction Era journal Posted by Picasa

Will you be my friend? From the Reconstuctions Era journal Posted by Picasa

In the Reconstruction Era workshop we were to work really quickly. Juliana timed us and kept us moving. This was a window/door page.  Posted by Picasa

Mandala pages from Reconstruction Era workshop Posted by Picasa

Your Dreams, pages from the Reconsturction Era journal Posted by Picasa

A page from the journal that I created in Juliana Cole's Reconstruction Era Workshop last July Posted by Picasa